Description
8-way Bass reflex Active HF Line Array Column – 8×0,75” HF drivers – 8x50Wrms – Direct. control +5°/-
25° ; Code: 34551; Built-in amplifier LF/HF: 8×40 W RMS; Built-in amplifier peak LF/HF: 8×100 W;
Frequency response: 1.8Hz – 20Khz -6dB; High frequency driver: 8 x 0.75 – 1 coil – neodymium inch;
The digital control part is activated by discrete amplification channels (one for each transducer) and DSP which operates in signal processing management sent to each speaker and driver.
The mechanical part is entrusted to 8 hybrid stepped motors, each of which is dedicated to the rotation of wave guide by 0,01° steps on the horizontal axis. It is thus possible to activate any radiation pattern in the maximum rotation range of the wave guide which goes from +35 to -35 with respect to the horizontal axis.
The MLA system features a RS-485 network connection for total control through PC (with FBT USB-RS485 Converter) and dedicated software with which it is possible to simulate the environment to sound reinforce, select the appropriate dispersion pattern for the audience, transfer all the aiming parameters of the system through the network with a single button. Various types of autoplay routine enable a totally automatic configuration of the system, without precluding for the possibility of aiming ‘fine-tuning’ in manual mode.
In mainly Live situations, when time is limited and it isn’t possible to connect to a PC, it is possible to manage steering, lobe width and equalization through 3 switch controls available on the back panel of the MLA column.
The modularity of the system allows for the construction of a column composed of a maximum of two MLA801a modules and 3 ML608A modules for a total of 4000W and a minimum frequency control of 100hz!
For usage in fixed installations, bars are provided for the close-fitting installation adjacent to walls. For live usage, an accessory is available for positioning on the 118Sa and 121Sa subwoofers of the FBT MITUS series.
- 8-way active HF Line Array Column, with digital/mechanical directivity aiming
- 8 x 0,75” (20mm) B&C neodymium drivers with 1” (25 mm) voice coil on wave guide
- 1.8KHz to 20KHz frequency response
- 8 class D 50Wrms amplifiers for a total of 400W power
- Completely controllable directional features, through control switches on the back panel or through PC software and dedicated network
- Revolutionary combined aiming digital/ mechanical full-range system from +5 a -25° with included lobe width between 5° and 25/40°
- 8 hybrid stepped motor controlled by a microprocessor for the mechanical aiming of wave guides
- PC/Slave function for aiming control via PC or other MLA module
- Frontal status LED
- DSP processor for the management of digital aiming and signal processing, 4 available presets
