Electro-Voice Q1212 (Power Amplifier, 2x 1200W @ 4 Ohms, 2U, 230V)

269,732.00

1200 watts per channel @ 4 ohms
Switchable LPN Filter – provides superior low end response and loudspeaker protection
Full EV Protection Package – safely protects your loudspeakers

Compare
Category:

Description

With 2 x 1200 W @ 4 Ohms and 2 x 1800 W @ 2 Ohms, the ElectroVoice Q1212 offers the horsepower to challenge the legendary P3000. It provides the same power from a 2 RU chassis at modest weight, making it a perfect subwoofer or high-power top drive for Phoenix, Tour X and Zx3/Zx5 systems or system combinations. Specifications: Maximum Input Voltage: +21 dBu (8.69 Vrms) Amplifier Gain (dB): 32 dB Continuous rated power (1k Hz, THD 1%) 2Ohm: 1800 Watts Continuous rated power (1k Hz, THD 1%) 4Ohm: 1200 Watts Input Impedance (balanced): 20 kOhm Continuous rated power (1k Hz, THD 1%) 8Ohm: 750 Watts Continuous rated power (20-20k Hz, THD<0,2%) 4 Ohm: 1100 Watts Continuous rated power (20-20k Hz, THD<0,2%) 8 Ohm: 550 Watts Maximum bridged output 4 Ohm: 3600 Watts Maximum bridged output 8 Ohm: 2400 Watts Frequency Response: 10 Hz...40 kHz Slew Rate: > 30 V / us Mains Voltage: 100 V, 120 V, 230 V or 240 V; 50-60 Hz (factory configured) Cooling: Front-to-rear, 3-stage fans Electronics Type: Amplifier Network Control (IRIS-Net): No Intermodulation Distortion (SMTPE): <0.1 % DIM 30: <0.05 % Signal-to-noise ratio (A-weighted): > 110 dB Input Sensitivity: +6.6 dBu Weight Net: 17.7 kg (39.02 lbs) Dimensions (HxWxD): 88.1 x 483 x 421.5 mm (3.47 x 19.02 x 16.59 in.) Output at 8 ohms stereo: 750 watts per channel

SPECIFICATIONS
Height 88.1mm (3.47″)
Width 483mm (19.02″)
Depth 421.5mm (16.59″)
SPECIFICATIONS
Weight Net 17.1kg (37.7 lbs)
Frequency Response (-3 dB) 10 Hz – 40 kHz (±1 dB)
Channels 2
Maximum Bridged Output 8Ω 2400Watts
Maximum Bridged Output 4Ω 3600Watts
Total Harmonic Distortion 0.03%
Slew Rate 30V/µs
Intermodulation Distortion (SMPTE) 0.1%
DIM 30 0.05%
Signal-to-Noise Ratio (A-weighted) 110dB
Input Impedance (Balanced) 20kΩ
Input Sensitivity +6.6 dBu
Network Control (IRIS-Net) No
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1200Watts
Amplifier Gain 32dB
Maximum Input Voltage +21 dBu (8.69 Vrms)
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 1100Watts Mains Voltage 100 V, 120 V, 230 V or 240 V; 50-60 Hz (factory configured) Electronics Type Amplifier Cooling Front-to-Rear, 3-stage fans Continuous Rated Power (1 kHz, THD 1%) 2Ω 1800Watts Topology Class-H Continuous Rated Power (1 kHz, THD 1%) 8Ω 750Watts Impedance 2/4/8Ω Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 550Watts