Cart 0
BOSE PowerMatch PM4500N Power Amplifier
Original price was: ₹506,880.00.₹504,580.00Current price is: ₹504,580.00.Key Features
- QuadBridge Technology – Allows each 4-channel loudspeaker block to be configured as Mono, V-Bridge, I-Share or Quad modes, allowing the total available power of the amplifier block to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
- Bose ControlSpace Designer software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
- Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
- Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
- PeakBank power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the reuse of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
- Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
BOSE PowerMatch PM8500N configurable power amplifier
₹870,525.00Key Features
- QuadBridge Technology — Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
- Bose Professional ControlSpace Designer software — PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose Professional ESP processors and CC control centers.
- Auto-Standby/Auto-Wake function — When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
- Dual voltage and current feedback loop — Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
- PeakBank power supply — Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
- Fast-tracking power factor correction (PFC) — Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
BOSE PowerShare PS404D adaptable power amplifier
Original price was: ₹240,415.00.₹239,500.00Current price is: ₹239,500.00.Key Features
- PowerShare technology: Distribute the total 400 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
- Load-independent outputs: Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.
- Integrated Dante audio networking: Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.
- Dual Feedback Loop system: Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose Professional PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.
- ControlSpace networking: Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.
- Integrated loudspeaker processing: Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.
- Auto-standby: Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.
BOSE PowerShare PS604D adaptable power amplifier
Original price was: ₹303,186.00.₹301,500.00Current price is: ₹301,500.00.Key Features
- PowerShare technology: Distribute the total 600 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
- Load-independent outputs: Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.
- Integrated Dante audio networking: Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.
- Dual Feedback Loop system: Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose Professional PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.
- ControlSpace networking: Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.
- Integrated Loudspeaker Processing: Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.
- Auto-standby: Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.
BOSE PowerShareX PSX1204D adaptable power amplifier
Key Features
- Power-sharing technology: Dynamically allocates power evenly or asymmetrically across outputs without having to bridge channels or lose channel count when powering Bose Professional loudspeakers.
- Bose Professional certified presets and ControlSpace Designer integration: Delivers the best performance, loudspeaker protection, and visibility of the entire Bose Professional system from a single UI for easy design, configuration, control, and monitoring.
- Proven Powersoft reliability: Ensures the systems operate every day, mitigating non-billable service calls.
- Flexible outputs: Capable of handling either low-impedance (2, 4, 8Ω) or high-impedance (70, 100V) loudspeaker loads.
- Built-in Dante audio: Supports up to 4 digital input channels from a Dante network eliminating the requirement of ordering and installing an accessory network card.
- 4 analog inputs: Provide line-level source connections.
- PowerShare Design Tool: A downloadable design tool that allows system designers the ability to choose their PowerShare amp and simulate the power-sharing capability that, in some cases, can lead to a lower-power model requirement and cost savings.
- GPIO connections: Provide a remote level, on/off, and alarm triggers.
- Network monitoring: Provides real-time system performance data, minimizing downtime, guesswork, and unnecessary service calls.
- Rack-friendly 1RU design: That is only 358 mm (14.1 in) deep eliminating the need for oversized racks.
BOSE PowerShareX PSX2404D adaptable power amplifier
Key Features
- Power-sharing technology: Dynamically allocates power evenly or asymmetrically across outputs without having to bridge channels or lose channel count when powering Bose Professional loudspeakers.
- Bose Professional certified presets and ControlSpace Designer integration: Delivers the best performance, loudspeaker protection, and visibility of the entire Bose Professional system from a single UI for easy design, configuration, control, and monitoring.
- Proven Powersoft reliability: Ensures the systems operate every day, mitigating non-billable service calls.
- Flexible outputs: Capable of handling either low-impedance (2, 4, 8Ω) or high-impedance (70, 100V) loudspeaker loads.
- Built-in Dante audio: Supports up to 4 digital input channels from a Dante network eliminating the requirement of ordering and installing an accessory network card.4 analog inputs: Provide line-level source connections.
- PowerShare Design Tool: A downloadable design tool that allows system designers the ability to choose their PowerShare amp and simulate the power-sharing capability that, in some cases, can lead to a lower-power model requirement and cost savings.
- GPIO connections: Provide a remote level, on/off, and alarm triggers.
- Network monitoring: Provides real-time system performance data, minimizing downtime, guesswork, and unnecessary service calls.
- Rack-friendly 1RU design: That is only 358 mm (14.1 in) deep eliminating the need for oversized racks.
BOSE PowerShareX PSX4804D adaptable power amplifier
Key Features
- Power-sharing technology: Dynamically allocates power evenly or asymmetrically across outputs without having to bridge channels or lose channel count when powering Bose Professional loudspeakers.
- Bose Professional certified presets and ControlSpace Designer integration: Delivers the best performance, loudspeaker protection, and visibility of the entire Bose Professional system from a single UI for easy design, configuration, control, and monitoring.
- Proven Powersoft reliability: Ensures the systems operate every day, mitigating non-billable service calls.
- Flexible outputs: Capable of handling either low-impedance (2, 4, 8Ω) or high-impedance (70, 100V) loudspeaker loads.
- Built-in Dante audio: Supports up to 4 digital input channels from a Dante network eliminating the requirement of ordering and installing an accessory network card.
- 4 analog inputs: Provide line-level source connections.
- PowerShare Design Tool: A downloadable design tool that allows system designers the ability to choose their PowerShare amp and simulate the power-sharing capability that, in some cases, can lead to a lower-power model requirement and cost savings.
- GPIO connections: Provide a remote level, on/off, and alarm triggers.
- Network monitoring: Provides real-time system performance data, minimizing downtime, guesswork, and unnecessary service calls.
- Rack-friendly 1RU design: That is only 358 mm (14.1 in) deep eliminating the need for oversized racks.
BOSE PowerSpace P21000A versatile power amplifier
Original price was: ₹212,738.00.₹211,600.00Current price is: ₹211,600.00.Key Features
- 1000 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems
- AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
- Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging
- I-Share outputs deliver 2x power level by combining the current of two channels
- Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns
BOSE PowerSpace P2600A versatile power amplifier
Original price was: ₹163,464.00.₹161,500.00Current price is: ₹161,500.00.Key Features
- 600 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems
- AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
- Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging
- I-Share outputs deliver 2x power level by combining the current of two channels
- Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns