Electro voice ZX4 15″ two-way loudspeaker system, 90 X 50 horn, integral stand mount, Neutrik Speakon, Black

Description

General Description: Technical Specifications:
• EVS15-SF 15” LF Transducer
• DH3 1.25” Voice Coil, 1” Exit
Compression Driver
• 90° x 50° Coverage Pattern
• 400W Continuous (1600W) Power Handling
• Adjustable Monitor Angle (45° or 55°)
• High Sensitivity, 132 dB Maximum SPL
• Lightweight 20.2 kg (44.5 lbs)
• Integral Pole Mount
The rugged enclosure of the Electro-Voice Zx4 is perfect for portable
main mix and monitor applications, while the stylish design gives it appeal in even the trendiest of environments. At only 20.2 kg (44.5 lbs), the
lightweight Zx4 allows ease of transport and set up.
Every detail of your music is reproduced from extended highs to powerful lows. The DH3 compression driver with its pure titanium diaphragm,
coupled with the Zx4’s large 90° x 50° horn allows for tremendous intelligibility and pattern control. The EVS15-SF 15” LF delivers tight, low bass
and outstanding power handling capacity.
Zx4 is capable as an entire system. With an integral pole mount the Zx4
is ready for main mix applications in DJ, band and general entertainment
use. To accomodate different stage depths, Zx4 incorporates retractable
monitor feet. This allows Zx4 to be used as a stage monitor with a 45° or
55° angle.
The high tech enclosure uses injection-molded high impact polypropylene structural foam to make the Zx4 incredibly durable. The enclosure
geometry elements have been carefully designed to provide maximum
rigidity and bass response.
Freq. Response1 (-3 dB): 60 Hz – 20 kHz
Freq. Range1 (-10 dB): 42 Hz – 20 kHz
Rec. Hipass Frequency: 42 Hz
Axial Sensitivity1
: 100 dB (1W/1m)
Max. Calculated SPL: 132 dB
Horizontal Coverage: 90°
Vertical Coverage: 50°
Power Handling: 400W Continuous, 1600W Peak
LF Transducer: EVS15-SF, 15 in (381mm) Driver
HF Transducer: DH3, 1 in (25.4mm) exit
Compression Driver
Crossover Frequency: 1.5 kHz
Nominal Impedance: 8 Ohms
Minimum Impedance: 6.5 Ohms
Connectors: (2) Neutrik Speakon NL4’s
Enclosure Material: Polypropylene Structural Foam
Suspension: Enclosure has locations for 3 Single-Stud
Attachment Plates and 8 Forged Steel
Eyebolts – 2 on Top, 2 on Side, and 4 on
Rear of Enclosure
Grille: Polyester Powder Coated, 16GA
Galvanized Steel, with Rotatable Logo
Dimensions (H x W x D): 692mm x 446mm x 411mm
(27.26” x 17.57” x 16.16”)
Net Weight: 20.2 kg (44.5 lbs)
Shipping Weight: 24.0 kg (52.9 lbs