Electro voice FM4.2 ( DUAL 4″ FLUSH MOUNT IN-WALL SPEAK)

Description

The Electro-Voice® EVID FM4.2 flush-mounted loudspeaker system is
a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 4” two-way loudspeaker
coupled with a 4” passive radiator and an internal line-matching
transformer. The loudspeaker features 4” low-frequency cone and
high-temperature voice-coil assembly along with a 4” long excursion
passive radiator and titanium coated dome tweeter. The EVID FM4.2
loudspeaker utilizes a crossover network, centered at 3,600 Hz, that
provides 16-dB-per-octave tweeter protection outside of its operating
range. In addition the EVID FM4.2 features a comprehensive protection
circuit to shield the woofer and tweeter drivers from excessive power
levels.
The perforated grille is finished in semi-gloss white powder-coated
enamel. The baffle and bezel is constructed from heat resistant ABS.
The rear enclosure is constructed from zinc-plated, steel. The rear
enclosure provides an optimum internal volume, ensuring extended lowfrequency performance. It is constructed from heavy-gauge, rugged
steel. The steel rear enclosure was optimized using FEA to virtually
eliminate panel resonance. The entire enclosure is less than 4” deep
providing an easy installation into nearly any tight wall or ceiling space.
A rear cover, with provisions for a junction box fitting, provides access
to a 4-pin terminal block that allows direct connection to the speaker
and provides pass through to additional speakers. FM4.2 loudspeakers
provide wide dispersion, high-efficiency, high-maximum output, ease of
installation, and wide-range reproduction of music or voice.

SPECIFICATIONS
Frequency Range (-10 dB) 52 – 20000kHz
HF Transducer 1 inch Titanium dome tweeter
Max. SPL/1m (calc)² 110dB
SPECIFICATIONS
Coverage (Nominal -6 dB) H 150°
LF Transducer 4 inch with 4 inch passive radiator
Coverage (Nominal -6 dB) V 150°
Power Rating 200W
System Power Handling (Continuous/Program/Peak) 50//200Watts
LF Power Handling 4-inch, plus 4-inch passiveWatts
HF Power Handling 1-inch (Titanium dome)Watts
Enclosure Material Zinc Plated Metal
Available Color White
Sensitivity 1 W/1 m 87dB
Height 350mm (13.78″)
Width 188.3mm (7.41″)
Depth 95.6mm (3.76″)
Weight Net 2.9kg (6.39 lbs)
Transformer Taps (Transformer Version Only) 1.75, 3.75, 7.5, 15, 30 at 70 v
Nominal Impedance 8Ω
Input Connections 4-pin Phoenix