My account

Login

Electro-voice ND66 (CondenserCardioid Microphone)

₹38,580.00

ND66
Condenser cardioid instrument microphone
Premium small-diaphragm condenser element
Self-biased condenser element is vividly responsive to sound sources that need a mic which translates transient details very well
Clean, crisp and detailed condenser sound
Captures all details of percussive and stringed instruments
Easy mic placement with locking pivoting head
Achieve ideal mic placement in virtually any situation by pushing a button, pivoting the head into position and releasing the button to lock
Selectable -10 and -20 dB pads
Provides the necessary gain reduction to prevent the mic element from overloading
Selectable 75 Hz and 150 Hz high-pass filters
Selectable HPF frequencies are strategically chosen to eliminate bothersome low frequencies from the signal path

Electro-voice ND68 (Dynamic SupercardioidKick Dum Microphone)

₹38,580.00

ND68
Dynamic supercardioid bass drum microphone
Excellent acoustic isolation
With deep lows and top-end punctuation
Large-diaphragm dynamic capsule
Creates a rich and detailed frequency response
Extremely high SPL handling capability
Manages close miking of high SPL transients and RMS wave fronts up to 144 dB SPL
Humbucking coil guards against line hum
Use with confidence near speaker cabinets and EMF-generating equipment racks
Memraflex grille resists denting
Durable tight-mesh grilles withstand extraordinarily rough treatment

Electro-voice ND76 (Dynamic vocal cardioidmicrophone without switch)

ND76

Dynamic cardioid vocal microphone

Excellent all-around vocal performance
Crisp, clear and balanced
Large-diaphragm dynamic capsule
Creates a rich and detailed frequency response
Shock-mounted capsule minimizes handling noise
Low frequency bumps and thumps won’t get into the PA
Humbucking coil guards against line hum
Use with confidence near speaker cabinets and EMF-generating equipment racks
Memraflex grille resists denting
Durable tight-mesh grilles withstand extraordinarily rough treatment

Electro-voice ND76-RC3 (Wireless head with ND76 capsule)

Thread-on microphone head for Electro-Voice andother brand’s wireless handheld transmitters
Excellent all-around vocal performance: crisp, clearand balanced
Large diaphragm dynamic capsule creates a rich anddetailed frequency response
Shock-mounted capsule minimizes handling noise
Memraflex grille resists denting

Electro-voice ND76S (Dynamic vocal cardioidmicrophone with switch)

ND76S

Dynamic cardioid vocal microphone with on/off switch

Excellent all-around vocal performance
Crisp, clear and balanced
Large-diaphragm dynamic capsule
Creates a rich and detailed frequency response
Shock-mounted capsule minimizes handling noise
Low frequency bumps and thumps won’t get into the PA
Humbucking coil guards against line hum
Use with confidence near speaker cabinets and EMF-generating equipment racks
Memraflex grille resists denting
Durable tight-mesh grilles withstand extraordinarily rough treatment

Electro-voice ND86 (Dynamic vocal supercardioidmicrophone)

ND86

Dynamic supercardioid vocal microphone

Excellent acoustic control in even the largest of venues
Reduction of low-frequency room tone through high-pass filtering and boosts & cuts in key high-mid frequencies separate the voice from the stage wash
Large-diaphragm dynamic capsule
Creates a rich and detailed frequency response
Shock-mounted capsule minimizes handling noise
Low frequency bumps and thumps won’t get into the PA
Humbucking coil guards against line hum
Use with confidence near speaker cabinets and EMF-generating equipment racks
Memraflex grille resists denting
Durable tight-mesh grilles withstand extraordinarily rough treatment

Electro-voice ND86-RC3 (Wireless head with ND86 capsule)

About this item
Thread-on microphone head for Electro-Voice and other brand’s wireless handheld transmitters
Excellent acoustic control in even the largest of venues: present, smooth and detailed sound
Large diaphragm dynamic capsule creates a rich and detailed frequency response
Shock-mounted capsule minimizes handling noise
Memraflex grille resists denting

Electro-voice ND96 (Dynamic vocalsupercardioidhighgain microphone)

ND96

Dynamic supercardioid vocal microphone

Push vocals through the mix
Structural and acoustical functions allow the signal to be pushed through incredibly loud ambient volumes without risking feedback
Large-diaphragm dynamic capsule
Creates a rich and detailed frequency response
Vocal presence emphasis switch
A selectable voice presence booster reduces certain low-mid frequency areas and emphasizes key upper-midrange vocal presence areas for a more profound vocal edge when driving the voice higher in the mix
Shock-mounted capsule minimizes handling noise
Low frequency bumps and thumps won’t get into the PA
Humbucking coil guards against line hum
Use with confidence near speaker cabinets and EMF-generating equipment racks
Memraflex grille resists denting
Durable tight-mesh grilles withstand extraordinarily rough treatment

Electro-Voice PA1250T (1 x 270 watts at 70V/100V, Compact 2RU Chassis, 230 vac operation)

DOWNLOADSWHERE TO BUY
PA1250T
Single‑channel 250 W power amplifier
Cool-running, saturation-free power for distributed installations
Ideal for sound reinforcement, paging, and life safety
250 W mono for 70/100 V lines
Compact 2 RU design
Stepped rear-panel level attenuation
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
Three-stage front-to-rear fans
Integrated rack ears for direct mounting

Electro-Voice PA2250T ( 2 x 270 watts at 4 ohms, 70V/100V or Low Impedance operation, Compact 2RU Chassis, 230 vac operation )

PA2250T
Dual 250 W/CH power amplifier
Efficient performance for low impedance or distributed systems
Ideal for sound reinforcement, paging, and life safety
250 W per channel for 4 Ω or 70/100 V lines
Bridged mono out for 540 W into 8 Ω
Compact 2 RU design
Stepped rear-panel level attenuation
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
Three-stage front-to-rear fans
Integrated rack ears for direct mounting

Electro-Voice PA2400T (2 x 450 watts at 4 ohms, 70V/100V or Low Impedance operation, Compact 2RU Chassis, 230 vac operation)

PA2400T
Dual 400 W/CH power amplifier
Efficient performance for low impedance or distributed systems
Ideal for sound reinforcement, paging, and life safety
400 W per channel for 4 Ω or 70/100 V lines
Bridged mono out for 860 W into 8 Ω
Compact 2 RU design
Stepped rear-panel level attenuation
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
Three-stage front-to-rear fans
Integrated rack ears for direct mounting

Electro-Voice PA2400T Rackmount 2-Channel 400W Power Amplifier

Comprehensive protection circuitry protects your amplifier from damage caused by overheating, overloads, and short-circuit issues. The output has a delayed connection at power-up to prevent damage to your speakers

Electro-Voice PA2450L ( 2 x 430 watts at 4 ohms, 2 x 400 watts at 70V/100V or Low Impedance operation, Compact 2RU Chassis, 230 vac operation )

PA2450L
Dual 450 W/CH power amplifier
Reliable high-quality power for installation
Ideal for sound reinforcement, paging, and life safety
450 W per channel @ 4 Ω (1 kHz)
Bridged mono out for 900 W into 8 Ω
Compact 2 RU design
Stepped rear-panel level attenuation
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
Three-stage front-to-rear fans
Integrated rack ears for direct mounting

Electro-Voice PA2450L Rackmount 2-Channel 450W Power Amplifier

This amplifier has a simple, easy-to-use interface with the power switch and indicator LEDs on the front panel, while the stepped level controls and switches for the selectable 50/300 Hz high-pass filter and dual/parallel/bridged mode are on the rear.

Electro-Voice PA4150 (4 x 160 watts at 4 ohms, Compact 2RU Chassis, 230 vac operation)

PA4150L

Quad 150 W/CH power amplifier

Flexible multi-channel power for installation
Ideal for sound reinforcement, paging, and life safety
150 W per channel into 4 Ω
Bridged mode for dual 315 W outputs into 8 Ω
Compact 2 RU design
Stepped rear-panel level attenuation
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
Three-stage front-to-rear fans
Integrated rack ears for direct mounting

Electro-voice PC BOUNDARY (Mic on/off switch, mic status LED)

PC Boundary
Multi‑pattern boundary layer microphone
Easy switching between omni, cardioid, supercardioid, or figure “8” polar patterns
Versatility for different acoustic environments
Consistent microphone voicing across all four patterns
Easy-to-use mute switch, programmable for either latching on/off or momentary operation

Electro-voice PC BOUNDARY SAT ( Mic on/off switch, mic status LED)

PC Boundary Satellite

Multi‑pattern boundary layer microphone

Accepts EV (REV, RE2, RE2PRO) and Telex (FMR or SAFE1000) bodypack transmitters
Easy switching between omni, cardioid, supercardioid, or figure “8” polar patterns
Versatility for different acoustic environments
Easy-to-use mute switch, programmable for either latching on/off or momentary operation

Electro-voice PC DESKTOP-12 (Mic on/off switch, mic status LED. 12-inch gooseneck)

PC Desktop

Multi‑pattern desktop microphone

Easy switching between omni, cardioid, supercardioid, or hypercardioid patterns
Mute switch with LED can be programmed as either push on/off or push-to-mute
Smooth, uniform frequency response in all patterns
Extended low-frequency response and switchable high-pass filter
Sturdy steel base