Cart 0
Login
BOSE MA12 modular column array loudspeaker
₹149,600.00Key Features
- Twelve 2.25-inch (57 mm) drivers mounted in a vertical line array deliver wide horizontal coverage with narrow vertical pattern control
- Modular design allows stacking of multiple enclosures in a line array configuration to provide increased vertical pattern control which improves “throw” distance and reduces unwanted floor/ceiling reflections
- 145° horizontal × 20° nominal coverage for a single module. Vertical coverage varies with number of modules stacked in line array configuration.
- Mid/high configuration allows bass management and design flexibility. Use with Bose Professional MB4, MB12, or MB24 modular bass loudspeakers for full-range reinforcement.
- Optional brackets allow easy installation of single-, double- or triple-stack line array modules
BOSE MA12EX modular column array loudspeaker
Original price was: ₹239,122.00.₹233,499.00Current price is: ₹233,499.00.Key Features
- Twelve 2.25-inch (57 mm) full-range drivers mounted in a vertical line array deliver wide horizontal coverage with narrow vertical pattern control
- Modular design allows stacking of multiple enclosures in a line array configuration to provide increased vertical pattern control which improves “throw” distance and reduces unwanted floor/ceiling reflections
- Articulated Array® design provides wide 160° horizontal coverage with 20° nominal vertical coverage for a single module. Actual vertical coverage varies with number of modules in line array configuration.
- Frequency range down to 58 Hz allows full-range speech and light music reinforcement without separate low-frequency loudspeakers. For extended bass and higher output levels, use with Bose Professional MB4, MB12, or MB24 modular bass loudspeakers.
- Optional brackets allow easy installation of single-, double- or triple-stack line array modules
BOSE MB210-WR outdoor subwoofer
₹182,554.00Key Features
- 2 × 10-inch high-excursion woofers for high-output bass in a compact enclosure. Transducers derived from award-winning F1 portable, powered subwoofer.
- 500 W long-term power handling for high sound output and reliability
- Low-frequency extension down to 37 Hz for impactful, deep-bass music reinforcement
- 123 dB maximum continuous SPL, 129 dB peak SPL
- Exterior-grade plywood enclosure with compact size for installations
- Install outdoors with an IP55 weather rating, three-layer stainless steel grille, water-resistant coating on woofer cone, industrial polyurea exterior coating, and molded cover to protect inputs
- U-bracket included for easy mounting to walls or ceilings
BOSE ontrolSpace EX-1280 digital signal processor
₹430,781.00Key Features
Open-architecture, 1RU design built for general-purpose and PA applications
USB connection facilitates easy integration with PC audio sources
Dante audio networking supports 64 × 64 audio channels for connection to other Dante-enabled products, including native Dante-integrated microphones, amplifiers, mixers, and endpoints
AmpLink output provides 8 channels of uncompressed, low-latency digital audio to AmpLink-equipped Bose Professional amplifiers
Front-panel interface features a large OLED display and rotary encoder for setting network parameters and monitoring channel activity
GPIO (5 in/5 out) and Serial for interfacing with external devices and control systems
BOSE PowerMatch AmpLink 24-channel input card
₹61,354.00Key Features
- AmpLink 24-channel digital audio transport
- Quick-connect RJ-45 connections on shielded CAT 5 cable
- Thru connection to daisy-chain up to 10 m between products
- 3-position bank select switch chooses 8 consecutive AmpLink channels the amplifier will amplify
- Each daisy-chained amplifier can choose either the same, or a different, bank of channels
- AmpLink can daisy-chain up to 8 amplifiers
- Any combination of AmpLink amplifiers can be daisy-chained.
BOSE PowerMatch Dante network card
₹93,636.00Key Features
- 8 × 8 channel I/O
- Diagnostic audio monitoring bus
- Gigabit Ethernet connections
- Port mode options for networking flexibility
- Supports redundant connections
BOSE PowerMatch PM4500N Power Amplifier
Original price was: ₹506,880.00.₹504,580.00Current price is: ₹504,580.00.Key Features
- QuadBridge Technology – Allows each 4-channel loudspeaker block to be configured as Mono, V-Bridge, I-Share or Quad modes, allowing the total available power of the amplifier block to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
- Bose ControlSpace Designer software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
- Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
- Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
- PeakBank power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the reuse of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
- Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
BOSE PowerMatch PM8500N configurable power amplifier
₹870,525.00Key Features
- QuadBridge Technology — Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode, allowing the total available power of the amplifier to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
- Bose Professional ControlSpace Designer software — PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection, or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages, load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose Professional ESP processors and CC control centers.
- Auto-Standby/Auto-Wake function — When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
- Dual voltage and current feedback loop — Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance, the amplifier consistently delivers the widest possible dynamic range, frequency response and lowest possible distortion.
- PeakBank power supply — Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
- Fast-tracking power factor correction (PFC) — Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
BOSE PowerShare PS404D adaptable power amplifier
Original price was: ₹240,415.00.₹239,500.00Current price is: ₹239,500.00.Key Features
- PowerShare technology: Distribute the total 400 watts asymmetrically across all outputs using patented PowerShare technology, which allows each output to deliver full power. Instead of selecting amplifier power based on the needs of the largest zone, you now have the freedom to use total amplifier power in any application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
- Load-independent outputs: Configure any channel for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging or using jumpers.
- Integrated Dante audio networking: Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs as selected in ControlSpace Designer software.
- Dual Feedback Loop system: Improve performance and reliability. The Dual Feedback Loop system, inherited from the field-proven Bose Professional PowerMatch amplifier line, allows for continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion while protecting loudspeakers.
- ControlSpace networking: Configure using ControlSpace Designer software for inclusion into larger networked audio systems where end-user controllers and scheduling events can control amplifier parameters.
- Integrated loudspeaker processing: Adjust various parameters using ControlSpace Designer software: nine-band PEQs, matrix mixing, crossover, limiters, delay, mute/output polarity, and more.
- Auto-standby: Save power — PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.