The Q66II from Electro Voice is a professional-quality rackmount power amplifier ideal for a variety of applications. It can operate in stereo, parallel, or bridged modes for terrific versatility. It offers XLR I/O connectors, as well as Speakon outputs, which allows you to connect the amplifier to virtually any sound system. The front panel features independent levels controls and easy-to-read indicator LEDs. Dual cooling fans with front-to-rear airflow keep system components cool. A switchable LPN filter provides extra kick, while a low-cut filter allows you to use small passive cabinets with the amplifier without needing to add subwoofers. The amplifier also offers protection circuitry, which prevents damage caused by overheating and short circuits. Specifications: Amplifier Gain (dB): 32 Continuous rated power (1k Hz, THD 1%) 2 Ohm: 900 Watts Continuous rated power (1k Hz, THD 1%) 4 Ohm: 600 Watts Input Impedance (balanced): 20 k Ohm Continuous rated power (1k Hz, THD 1%) 8 Ohm: 380 Watts Continuous rated power (20-20k Hz, THD<0,2%) 4 Ohm: 500 Watts Continuous rated power (20-20k Hz, THD<0,2%) 8 Ohm: 250 Watts Maximum bridged output 4 Ohm: 1700 Watts Maximum bridged output 8 Ohm: 1200 Watts Slew Rate: > 26 V / us Electronics Type: Amplifier Network Control (IRIS-Net): No Total harmonic distortion: <0.03 % Intermodulation Distortion (SMTPE): <0.1 % Signal-to-noise ratio (A-weighted): > 107 dB Input Sensitivity: +3.1 dBu Weight Net: 14.8 kg (32.63 lbs) Dimensions (HxWxD): 88.1 x 483 x 421.5 mm (3.47 x 19.02 x 16.59 in.) Output at 8 ohms stereo: 380 watts per channel
SPECIFICATIONS
Height 88.1mm (3.47″)
Width 483mm (19.02″)
Depth 421.5mm (16.59″)
SPECIFICATIONS
Frequency Response (-3 dB) 10 Hz – 40 kHz (±1 dB)
Weight Net 14.8kg (32.63 lbs)
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 500Watts
Cooling Front-to-Rear, 3-stage fans
Electronics Type Amplifier
Topology Class-AB
Continuous Rated Power (1 kHz, THD 1%) 2Ω 900Watts
Impedance 2/4/8Ω
Continuous Rated Power (1 kHz, THD 1%) 8Ω 380Watts
Channels 2
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 250Watts
Maximum Bridged Output 8Ω 1200Watts
Maximum Bridged Output 4Ω 1800Watts
Total Harmonic Distortion 0.03%
Slew Rate 26V/µs
Intermodulation Distortion (SMPTE) 0.1%
DIM 30 0.05%
Signal-to-Noise Ratio (A-weighted) 107dB
Input Impedance (Balanced) 20kΩ
Input Sensitivity +3.1 dBu
Network Control (IRIS-Net) No
Continuous Rated Power (1 kHz, THD 1%) 4Ω 600Watts
Amplifier Gain 32dB
Maximum Input Voltage +21 dBu (8.69 Vrms)
ELECTRO VOICE
ELECTRO VOICE
ELECTRO VOICE
