JBL ASB6115 High Power Single 15″ Subwoofer



  • 2265H-1 15″ Differential Drive® dual voice coil dual gap, neodymium magnet transducer
  • 800 watts continuous pink noise, 3200 watts peak power handling capacity
  • Large vent area for high output with low distortion
  • FIR Tuning Set Matches Phase Profile to Full-Range Models
  • For ground-stacked or suspended applications in stand-alone arrays or in combination with other
    AE Series products.


The ASB6115 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2265H-1 Differential Drive® dual voice coil dual gap 15″ woofer. This woofer features neodymium magnet and ultra robust cone for extra long life.

  • Specifications

    Frequency Range (-10dB) 32 Hz – 1 kHz
    Frequency Response (±3 dB) 42 Hz – 1 kHz
    Transducer Power Rating (AES) 800 W (3200 W peak), 2 hrs.
    System Power Rating 675 W (2700 W peak), 100 hrs.
    Maximum SPL (1m) 35 Hz – 400 Hz: 126 dB-SPL cont avg (132 dB peak)
    System Sensitivity 35 Hz – 400 Hz: 97 dB-SPL, 1W (2.83V) @ 1m
    Nominal Impedance 8 ohms
    LF Driver 1 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® driver
    Enclosure Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
    Suspension Attachment 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
    Finish Black DuraFlex™ finish. White available upon request.
    Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
    Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
    Environmental Mil-Std 810; IP-x3 per IEC529.
    Dimensions (H x W x D in vertical orientation) 483 x 419 x 597 mm(19.0 x 16.5 x 23.5 in)
    Net Weight (each) 20.6 kg (45.5 lb)
    Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers.
    Nominal LF Driver Impedance 8 ohms