Description
The Electro-Voice Zx5-90PI features a molded polymer enclosure that
is inherently water resistant. The addition of a multilayer grille with
hydrophobic cloth and a gland nut input connection completes it for a
highly weather resistant system. The Zx5 is the new standard of no compromise audio performance and versatility in a simple to use, compact
package.
At its heart are the transducers. First is the DVX3150 high performance
low frequency transducer. EV used advanced computer aided design
techniques to create forced air, directional voice coil cooling for high
power and efficiency. Finite element analysis was used to optimize the
suspension and magnetic structure for long, linear travel to provide low
distortion and greater LF extension. These features and details, such
as forged magnetic components and special materials, provide reliability with a 500W power rating in a lightweight transducer. Next is the
ND2, a 2-inch voice coil compression driver based on neodymium motor
structure to allow for maximum output while reducing size and weight to
a minimum. Its precision phasing plug and titanium diaphragm provide
better HF performance, while the integral heatsink provides cooling for
high power output.
The high tech enclosure uses injection-molded high-impact polypropylene structural foam to make the Zx5 incredibly durable. The enclosure
geometry elements have been carefully designed to provide maximum
rigidity and bass response.
Two coverage patterns are available; 60° x 60° coverage for long-throw
and cluster applications, 90° x 50° coverage for wider coverage or shorter
distances.
The Zx5 is equipped with three anchor plates for rigging with single studfittings, along with two more possible anchor plate attachment points on
the bottom. For permanent suspension or attaching brackets, the Zx5
also has two M8 inserts on the top and bottom, two under the handle,
and four on the back of the enclosure, for a total of 10.
Technical Specifications:
Freq. Response1 (-3 dB): 58 Hz – 18 kHz
Freq. Range1 (-10 dB): 39 Hz – 20 kHz
Rec. Hipass Frequency: 36 Hz
Axial Sensitivity1
: 98 dB (1W/1m)
Max. Calculated SPL: 132 dB
Horizontal Coverage: 90°
Vertical Coverage: 50°
Power Handling (Passive): 600W Continuous, 2400W Peak
LF Power Handling (Biamp): 500W Continuous, 2000W Peak
HF Power Handling (Biamp): 40W Continuous, 160W Peak
LF Transducer: DVX3150, 15 in (381mm) Driver
HF Transducer: ND2, 1 in (25.4mm) exit Neodymium
Compression Driver
Crossover Frequency: 1.5 kHz
Nominal Impedance: 8 Ohms
Minimum Impedance: 6.5 Ohms
Connectors: 2 Conductor SJO Cable and Gland Nut
Enclosure Material: Polypropylene Structural Foam
Suspension: Enclosure has locations for 5 Single-Stud
Attachment Plates and 10 Forged Steel
Eyebolts – 2 on Top, 2 on Bottom, 2 on
Side, and 4 on Rear of Enclosure
Grille: Polyester Powder Coated, 16GA
Galvanized Steel, with Hydrophobic Cloth
Environmental Spec: IEC 529 IP24 / IP44 (PI Version)
Dimensions (H x W x D): 692mm x 446mm x 411mm
(27.26” x 17.57” x 16.16”)
Net Weight: 22.2 kg (49.0 lbs)
Shipping Weight: 26.0 kg (57.4 lbs)
