Electro voice ZX3-90PI-B weatherized, permanent installation, 12″ two-way loudspeaker system, integral stand mount, 90 X 50 horn, Black


DVX3121 12” LF Transducer with Forced Air
• ND2 2” Voice Coil, 1” Exit Neodymium
Compression Driver
• 90° x 50° Coverage Pattern
• 600W Continuous (2400W Peak) Power
• High Sensitivity, 131 dB Maximum SPL
• Adjustable Monitor Angle (45° or 55°)
• 2 Anchor Plates for Single Stud Fittings and
7 Integral Suspension Points
• Available in Black or White
• All Weather IEC 529, IP44, & MIL810
Environmental Specs
• Full Line of Accessories



The Electro-Voice Zx3 is the new standard of no compromise audio performance and versatility in a simple to use, compact package. The ZX3-90PI
features a molded polymer enclosure that is inherently water resistant. The
addition of a multilayer grille with hydrophobic cloth and a gland nut input
connection allows for a highly weather resistant system.
The high tech enclosure uses injection-molded high-impact polypropylene
structural foam to make the Zx3 incredibly durable. The enclosure geometry
elements have been carefully designed to provide maximum rigidity and
bass response. By design the Zx3 is also a perfect solution for stage monitors by allowing two angles (45° or 55°) without any additional accessories.
Two coverage patterns are available; 60° x 60° coverage for long-throw
and cluster applications, 90° x 50° coverage for wider coverage or shorter

Technical Specifications:
Freq. Response1
(-3 dB): 58 Hz – 15 kHz
Freq. Range1
(-10 dB): 48 Hz – 20 kHz
Rec. Hipass Frequency: 50 Hz
Axial Sensitivity1
: 97 dB (1W/1m)
Max. Calculated SPL: 131 dB
Coverage (Horiz. x Vert.): 90° x 50°
Power Handling (Passive): 600W Continuous, 2400W Peak
LF Power Handling (Biamp): 500W Continuous, 2000W Peak
HF Power Handling (Biamp): 40W Continuous, 160W Peak
LF Transducer: DVX3121, 12 in (305mm) Driver
HF Transducer: ND2, 1 in (25.4mm) exit Neodymium
Compression Driver
Crossover Frequency: 2 kHz
Nominal Impedance: 8 Ohms
Minimum Impedance: 6.2 Ohms
Connectors: 2 Conductor SJO Cable and Gland Nut
Enclosure Material: Polypropylene Structural Foam
Suspension: Enclosure has locations for 4 Single-Stud
Attachment Plates and 7 Forged Steel Eyebolts – 2 on Top, 2 on Bottom, 2 on Side,
and 1 on Rear of Enclosure
Grille: Polyester Powder Coated, 16GA
Galvanized Steel, with Rotatable Logo
Environmental Spec: IEC 529 IP24 / IP44
Dimensions (H x W x D): 613mm x 397mm x 362mm
(24.14” x 15.64” x 14.26”)
Net Weight: 19.8 kg (43.7 lbs)
Shipping Weight: 22.1 kg (48.6 lbs)