Skip links

Audio Technica M2 (Wireless In Ear monitor )

Original price was: ₹60,500.00.Current price is: ₹49,900.00.

The M2 Wireless In-Ear Monitor System is designed to make professional in-ear monitoring features accessible for performers who want to be free from the problems associated with floor wedges. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. The wireless UHF M2T Stereo Transmitter provides a choice of 100 selectable frequencies and is equipped with two XLR/¼” combo input connectors into which users can connect line-level inputs. While up to 10 complete M2 systems may be used on stage simultaneously, any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.

Description

Operating Frequencies: Band E: 790.000 to 822.000 MHz, 100 frequencies
Band F: 832.000 to 865.000 MHz, 100 frequencies
Band L: 575.000 to 608.000 MHz, 100 frequencies
Band M: 614.000 to 647.000 MHz, 100 frequencies
Not all frequency bands available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM stereo
Maximum Deviation: ±40 kHz
Dynamic Range: 90 dB (typical), A-weighted
Total Harmonic Distortion: <1% at (1 kHz, ±20 kHz Deviation) Operating Range: 100 m (300'), typical Open range environment with no interfering signals. Operating Temperature Range: -5° C (23° F) to +50° C (122° F) Battery performance may be reduced at very low temperatures. Frequency Response: 60 Hz to 13 kHz (+/- 3 dB) Simultaneous Use: 10 channels per band (maximum recommended) For assistance with multi-band operation or other frequency coordination issues, please contact your local Audio-Technica customer service representative. Receiver Specifications Receiving System: Double conversion superheterodyne RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination) Headphone Output Connector: 3.5 mm TRS stereo phone jack Headphones Output Power: 65 mW (at 32 ohms) Antenna Input: SMA-type, 50 ohms Aux. Input Connector: 3.5 mm TRS stereo phone jack Batteries: 2 x 1.5V AA (not included) Battery Life: 8 hours (alkaline). Depending on battery type and use pattern Dimensions: 70.0 mm (2.76") W x 25.0 mm (0.98") D x 110.0 mm (4.33") H Net Weight: 110 g (3.9 oz), without batteries Accessories Included: EP3 earphone; frequency sticker; flexible antenna Transmitter Specifications Power Output: 10 mW/30 mW (switchable), 50 ohms Limited to 10 mW within 863 MHz to 865 MHz Following national regulations Spurious Emissions: Following federal and national regulations Input Connection: XLRF-type/6.3 mm stereo (1/4") combination connector Pin 1 and Sleeve: Ground Pin 2 and Tip: Hot Pin 3 and Ring: Cold Maximum Input Level: XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu 6.3 mm (1/4") mono, unbalanced: +26 dBu Loop Output Connection: XLRM-type connector Pin 1: Ground Pin 2: Hot Pin 3: Cold Power Requirement: 12-18V DC, 600 mA Headphone Output Connector: Headphone Output Power: Antenna Connector: Dimensions: 210.0 mm (8.30") W x 132.0 mm (5.20") D x 44.0 mm (1.70") H Net Weight: 870 g (30.7 oz), without accessories Accessories Included: AC adapter (country dependant); rack mount adapters

X