Wireless Accessories

Showing all 14 results

  • 0 out of 5

    AKG AB4000

    49,027.00

    AB4000 EW is a high-performance antenna booster to compensate signal loss on long antenna cables. One AB4000 EW can compensate 3.5 to 17.5 dB of cable attenuation. Up to two boosters can be cascaded in case of extremely long cable runs.

    Quick ViewCompare
  • 0 out of 5

    AKG APS4

    135,099.00

    The APS4 is a wide-band UHF active Antenna and Power Splitter that can feed up to 4 receivers with the RF signal coming from one pair of antennas and also supplies power to all connected receivers via BNC cables. The splitter operates in an extended frequency range of 470 to 952 MHz. Adjustable RF-level attenuation settings guarantee maximum operating distance even when using different cable lengths and different types of cables. The APS4 comes in a rugged half-rack metal housing and works with all active and passive AKG antennas available on the market (RA4000 B/W, RA4000 W, SRA2 B/W and SRA2 W). The product is shipped with a rack mount kit (RMU4000), two front mount antenna cables and ten BNC cables (MKPS) for an immediate system setup.

    Quick ViewCompare
  • 0 out of 5

    AKG BP4000

    9,699.00

    BP4000 Battery Pack

    Quick ViewCompare
  • 0 out of 5

    AKG CU4000-PSU

    103,599.00

    The BP4000 and CU4000 represent a premium charging system for the transmitter of the WMS4500 wireless microphone system as well as for the body-pack receiver of the IVM4500 IEM in-ear monitoring system. The CU4000 provides two charging compartments for simultaneous charge of two devices. An integrated microprocessor monitors battery status and calculates the remaining battery life. It informs the user about the time needed to return to maximum service capability. Integrated charging contacts allow the BP4000 battery-pack to be used separately or to remain inside the transmitter or receiver while charging on the CU4000. The BP4000 plus CU4000 system helps to reduce battery costs as well as environmental hazards from used batteries.

    Quick ViewCompare
  • 0 out of 5

    AKG HELICAL

    86,225.00

    The   HELICAL antenna is a passive circular polarized directional wide-band UHF antenna which can be used as a transmitting or receiving antenna for wireless microphones and in-ear monitoring systems. It operates in a frequency range from 470 to 740 MHz and provides an antenna gain of 9dB. This circular polarized HELICAL antenna is specially designed for tour sound, sports and broadcast applications where long range FOH positions of many hundreds of feet often require a high gain. With the included universal thread adapter it can be mounted on floor stands with both 3/8″ or 5/8″ screws. The HELICAL antenna comes with a durable, water resistant nylon cover which also helps to compress the antenna to easily fit inside a rack drawer.

    Quick ViewCompare
  • 0 out of 5

    AKG LC81 MD

    39,299.00

    When it comes to sound, its sensitive cardioid polar pattern picks up a wide range of frequencies—from bass to soprano—and provides flexibility in getting the best sound from the source. Placed close to the performer, it accurately picks up low-end frequencies; place it farther away for performances in a higher range.

    Quick ViewCompare
  • 0 out of 5

    AKG LC82 MD

    48,162.00

    As one the smallest omnidirectional microphones in the world, the LC82 MD reference lightweight lavalier microphone takes pride in outperforming mics many times its size. With a diameter of only 3mm and length of 6.5mm, it’s ready to take on the biggest stages without making a scene.

    Quick ViewCompare
  • 0 out of 5

    AKG MKA20

    5,099.00

    Antenna cable for Wireless systems, 20m length, BNC connectors. The cable for connecting external antennas, antenna boosters, antenna booster supplies, antenna power splitter and receivers shall be an RG 58 cable (50 Ohms), length 20m, gold plated BNC connectors on both ends.

    Quick ViewCompare
  • 0 out of 5

    AKG MKA5

    6,299.00

    Antenna cable for Wireless systems. The cable for connecting external antennas, antenna boosters, antenna booster supplies, antenna power splitter and receivers shall be an RG 58 cable (50 Ohms), length 5m, gold plated BNC connectors on both ends.

    Quick ViewCompare
  • 0 out of 5

    AKG RA4000 EW

    26,499.00

    The  RA4000-EW is a passive omnidirectional wide-band UHF antenna that can be used as a transmitting or receiving antenna for wireless microphones and in-ear monitoring systems. It operates in a frequency range from 470MHz to 952MHz, providing a covering angle of 360° and an antenna gain of 1dB. The RA4000 EW is built with passive technology and requires no powering. It works for short cable lengths up to 10m and supports a professional BNC connector.

    Quick ViewCompare
  • 0 out of 5

    AKG RA4000B/EW

    29,299.00

    The RA4000- B/EW is an active omnidirectional wide-band UHF receiving antenna for use with wireless microphone systems. It operates in a frequency range from 470MHz to 952MHz, providing a covering angle of 360° and a total gain of 18dB. The RA4000 B/EW has a built-in amplifier to compensate long cable runs. With dedicated antenna components, it works for cable lengths up to 300m. The RA4000 B/EW is remotely powered through the antenna cable.

    Quick ViewCompare
  • 0 out of 5

    AKG SRA2 EW

    70,599.00

    The SRA2 EW is a passive directional wide-band UHF antenna that can be used as a transmitting or receiving antenna for wireless microphones and in-ear monitoring systems. It operates in a frequency range from 470MHz to 952MHz and provides a covering angle of 70° and an antenna gain of 6dB. The SRA2 EW is built in a passive technology and requires no powering. It works for short cable lengths up to 10m and supports a professional BNC connector.

    Quick ViewCompare
  • 0 out of 5

    HARMAN CU400

    49,099.00

    The AKG CU400 is a high-performance drop-in-style battery charger for WMS420, WMS450 and WMS470 series wireless handheld and body-pack transmitters. The charger’s design and the integrated charging contacts of the transmitter conveniently eliminate the need to remove the battery before charging; simply drop the entire transmitter into the slot. The charger monitors battery voltages and temperatures during charging and automatically ends the cycle when the batteries are fully charged. The CU400 provides a status display LED for full control of the charging status.

    Quick ViewCompare
  • 0 out of 5

    HARMAN CU800

    52,670.00

    The charging unit CU800 has been designed specifically for use with the DMS800 wireless system. It is also fully compatible with the DMS700. The charger provides two charging slots specially shaped to accept the DHT800 (with the included adapters) and DPT800 transmitters. The charging slots operate completely independently so two transmitters with rechargeable batteries can be charged simultaneously. Integrated charging contacts allow the batteries to remain inside the transmitter while charging on the CU800.

    Quick ViewCompare
X