Revel M8 SP2- (2-way Passive Bass Reflex On-wall speaker)PAIR

54,516.00

Revel Concerta M8 SP2 is a 2-way Passive Bass Reflex On-wall speaker by Revel. It features a 1″ Hard-Dome Tweeter and 2 x 3″ Micro Ceramic Composite Woofer. The speaker has a frequency range of 110-21k Hz and a sensitivity of 88 dB.

Compare
SKU: m8-sp2 Categories: , Tag:

Description

“High-Frequency Driver Components 1” MCC Dome Tweeter; Low-Frequency Driver Components Dual 3” Micro Ceramic Composite (MCC) Cone Woofers; Frequency Response (+/-3DB) 110Hz – 21kHz; Recommended Amplifier Power Range (WATTS) 10 – 125 Watts; Crossover Frequencies 2.2kHz; Nominal Impedance 8 Ohms; Sensitivity 88dB (2.83V @1M); Finishes High-gloss Black, White, Red; Dimensions (H X W X D) 11.63”/4.25”/4.5” (296mm/107mm/113mm); Weight 3.45 lbs /.1.6kg per Speaker”.

Revel M8 SP2 has a Frequency response range of 110-21k Hz at ±3dB and Power Range of 10-125 watts. At a minimum frequency of 110 Hz, it is hard to expect a strong bass response from M8 SP2 so depending on your intended use, using a subwoofer will significantly help to widen the response range.

Revel M8 SP2 has a Bass Reflex type cabinet and Aluminum finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.

Speaker Feet

Revel M8 SP2 comes with 2 Rubber foot pads which you can use to secure your loudspeaker on the surface that you are putting on.

It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.

Port Position

Revel M8 SP2 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.