BOSE (FREESPACE IZA 2120-LZ DM+FS EQ 230V EU)

Description

Opti-voice® paging equalizes the vocal frequency range for clear speech intelligibility while providing seamless transitions.
Dynamic EQ ensures full and balanced music at any volume level.
Loudspeaker EQ enriches audio quality and simplifies connection to Bose® loudspeakers: FreeSpace® FS2C/SE/P, FS4CE/SE and
DesignMax DM2C-LP/S, DM3C/SE.
Remote option for volume/source selection eliminates the need for bulky, inefficient, and sound-altering in-line volume controls.
Expansion-ready connectivity with FreeSpace ZA amplifiers to drive additional zones.
Reliable 2 x 120 W Class-D amplification optimized for low-impedance applications.
Intuitive feature setup enables the amplifier to be configured without a PC for output, remote, paging, auxiliary input/output and
automatic standby options.
Auto-Standby feature allows the amplifier to consume less power when not in use.
Simplified front panel interface provides end users with tone, source selection and master volume controls as well as a connection to
mobile sources via a 3.5 mm connector.
Remote muting allows the amplifier to be muted via a centralized control system

Technical Specifications
POWER RATING
Amplifier Power 2 x 120 W @ 4 Ω, 2 x 60 W @ 8 Ω
AUDIO PERFORMANCE
Frequency Response 20 Hz – 20 kHz (+0/–3 dB, @ 1 W reference 1 kHz)
THD+N ≤ 0.5 % (at rated power)
Channel Separation (Crosstalk) ≤ –58 dBu (below rated power, 1 kHz)
Dynamic Range 88 dB
INTEGRATED DSP
A/D and D/A Converters 24-bit / 48 kHz
Processing Functions Loudspeaker EQ, Bose® Opti-voice® paging, Dynamic equalization
Loudspeaker Presets Flat, FreeSpace FS2C/SE/P, FS4CE/SE and DesignMax DM2C-LP/S, DM3C/SE
Audio Latency 10.4 ms (any input to speaker output or aux output)
AUDIO INPUTS LINE INPUTS PAGE INPUTS AUXILIARY INPUTS
Input Channels 2 unbalanced, 2 balanced 1 balanced mic/line 1 unbalanced line
Connectors Stereo RCA, 5-pin Euroblock 4-pin Euroblock 1/8” (3.5mm) TRS
Input Range –8 dBu to +22 dBu –58 dBu to 12 dBu –60 dBu to –1 dBu
Adjustment Range 0 dB to –30 dB 0 dB to +50 dB Fixed
Input Impedance 20 kΩ 2 kΩ 20 kΩ
Maximum Input Level 22 dBu 12 dBu –1 dBu
Sensitivity –8 dBu n/a –3 dBu
Nominal Input Level 4 dBu –38 dBu –8 dBu
AUDIO OUTPUTS AMPLIFIER OUTPUTS AUXILIARY OUTPUTS
Outputs 2 1 unbalanced
Connectors 2-pin inverted Euroblock Stereo RCA
Output Impedance 4 Ω 150 Ω
Nominal Output Level 2 x 120 W @ 4 Ω, 2 x 60 W @ 8 Ω 2 dBu
INDICATORS AND CONTROLS
Power LED Solid blue indicates power is on, blinking blue indicates standby mode
Input Signal Clip LED Green indicates input signal is within –37 dBu to 11 dBu, red indicates signal is over 11 dBu
Output Signal Clip LED Green indicates output signal is within –46 dBFS to –2 dBFS, red indicates signal is over –2 dBFS, approximately 80 W/
channel, for each output 120 watts is 0 dBFS
Controls, Front Panel Power On/Off, Input Select (A/B), Treble/Bass Tone Controls (x2), Master Level
Controls, Rear Panel Amplifier Mode DIP switches, Loudspeaker EQ preset selector, Input Gain (A/B/Page), Output trims, Remote
ELECTRICAL
Mains Voltage 100 VAC – 240 VAC (±10%, 50/60 Hz)
AC Power Consumption 24 W (Standby) 300 W (Max)
Mains Connector Standard IEC (C14)
Maximum Inrush Current 12.6 Amps (230 VAC / 50 Hz), 6.6 Amps (120 VAC / 60 Hz)
Overload Protection High temperature, output short, excessively low or high AC line voltage
PHYSICAL
Dimensions (H x W x D) 1.7″ H x 19.0″ W x 12.8″ D (44 mm x 483 mm x 324 mm)
Shipping Weight 12.0 lb (5.4 kg)
Net Weight 9.0 lb (4.1 kg)
Cooling System Single fan, continuous left-to-right air flow
GENERAL
Inputs (Control) Remote input for one CC-1 or CC-2 ControlCenter zone controller. Mute input control via contact closure (normally