BOSE (CONTROLSPACE EX-440C PROCESSOR 230V EU)

Description

All-in-one design supports simultaneous VoIP, PSTN, and USB soft codecs in a single, 1RU model
8-channel advanced AEC with multiple references, routable to both analog and Dante inputs
Adaptable noise cancellation on each AEC channel; non-linear processing and comfort noise to enhance the clarity
and intelligibility of meetings
Single-line VoIP with an internal web interface, allowing IT personnel to configure VoIP parameters without design file
access or integrator involvement
PSTN connection (RJ-11) for worldwide POTS/analog telephone systems
USB connection facilitates easy integration with all soft codecs
Dante audio networking includes 16 x 16 audio channels for connection to other Dante-enabled products,
including native Dante-integrated microphones and amplifiers
Bose AmpLink port provides 4 channels of uncompressed, low-latency digital audio to AmpLink-equipped
Bose amplifiers
GPI and Serial for external connections, such as fire alarm triggers and interfacing with control systems
Front-panel interface features a large OLED display and rotary encoder for setting network parameters
and monitoring channel activity

Technical Specifications
INTEGRATED DSP
Signal Processor/CPU 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz
Maximum Calculation 3.6 GIPS / 2.7 GFLOPS
Delay 43 s
Audio Latency 1.05 ms (analog in to analog out, without AEC)
A/D and D/A Converters 24-bit
Sample Rate 48 kHz
ANALOG AUDIO INPUTS
Input Channels 4 balanced, mic/line level
Connectors, Input 3.81 mm detachable Euroblock, 6-pin
Input Impedance 12 kΩ @ 1 kHz (with or without phantom power active)
Maximum Input Level +24 dBu
Equivalent Input Noise -118 dB at 44 dB gain setting
Phantom Power +48 VDC, 10 mA, software selectable per input
Gain Settings 0 / +14 / +24 / +32 / +44 / +54 / +64 dB
ANALOG AUDIO OUTPUTS
Output Channels 4 balanced, line level
Connectors 3.81 mm Euroblock, 6-pin
Output Impedance 200 Ω
Maximum Output Level +24 dBu
AUDIO PERFORMANCE SPECIFICATIONS
Frequency Response 18 Hz to 20 kHz (+0.8 dB/-0.2 dB ref 1 kHz)
THD+N < 0.003% @ +4 dBu (A-weighted/20 Hz to 18 kHz) < 0.01% @ +44 dBu (A-weighted/20 Hz to 18 kHz) Channel Separation (Crosstalk) < -105 dB at +4 dBu 1 kHz input signal Dynamic Range > 115 dB, A-weighted 20 Hz – 18 kHz, analog input to analog output
ACOUSTIC ECHO CANCELLING
Tail Length 480 ms
Noise Reduction 32 dB
Latency 50 ms
Channels 8
References 4
AUDIO OVER IP
Dante 16 × 16, primary/secondary, routable to AEC
DIGITAL AUDIO OUTPUTS
AmpLink (Output only) 4 low latency (< 21µs), 48 kHz. Requires shielded Cat 5/6 COMMUNICATION PORTS USB Device Micro-B type, stereo in/out, HID Support VoIP RJ-45; 1 line PSTN RJ-11; 1 line, Tx/Rx CONTROL INPUTS Inputs (Control) 1 analog or digital input, 2 kΩ internal pull-up resistor to 5 V, 3.81 mm detachable Euroblock, 2-pin Analog Input Voltage Range 0 V to 3.3 V (maximum 5 V) Digital Input Voltage Range 0 V to 3.3 V (threshold voltage = 1.6 V)