Description
• One-cable-from-the table connectivity supports PoE+, Dante™ audio
networking, logic I/O and LED power to maximize ease of integration
• Broad conference microphone compatibility with 4 high-quality
mic/line input channels, each featuring 48V phantom power, 12V
LED power, 1 logic input and 2 logic outputs for interfacing with
microphone pushbuttons and indicators
• Dante™ audio networking for connection to other Dante-enabled
products over Ethernet-based networks
• Dual network and power connectors allow daisy-chaining of multiple
EX endpoints
• Rotatable mounting tabs allow for multiple mounting options
• Low-profile aluminum enclosure with integrated LED indicators for
unobtrusive under-table mounting
• Simplified software configuration via ControlSpace Designer
software. Supports autodiscovery, auto-routing, and logic presets for
microphone LEDs and pushbuttons
• Optional installation accessories include a magnetic mounting plate
for single-handed under-table mounting, a microphone extension
cable, and a 60 W power supply
• Power and signal indicators
Technical Specifications
AUDIO INPUTS
Input Channels Four (4) analog, balanced microphone/line level
Connectors Four (4) 3.81 mm detachable Euroblock connectors, 7-pin
Phantom Power +48VDC, software selectable per input
Control GPIO 2 logic outputs (100mA low, 8V open, 10mA @ 2.5V high),
1 logic input (0 to 5V, threshold = 1.6V, 2K pull-up to 5V)
Gain Settings 0 / +15 / +30 / +45 dB, software selectable
Input Impedance > 1.8 kΩ at any gain setting
Equivalent Input Noise –115 dBu (+45 dB gain)
Maximum Input Level +20 dBu (using -12 dB gain setting)
System THD < 0.01 % at any gain setting, input signal 3 dB below maximum
Frequency Response 20 Hz — 20 kHz, ± 1 dB
NETWORK
Connectors Two (2) RJ-45, one front (supports PoE+), one rear
Audio Over IP Dante™ Ultimo X4
POWER
Microphone LED power 12 VDC, 200 mA
PoE Class Class 0 802.3at PoE+ PD compliant
Connectors (2) 3.81 mm Euroblock connector, 2-pin
External Power Supply 12 VDC, daisy-chainable
Power Consumption 4.3 watts plus 1 watt for Phantom Power if used
SOFTWARE APPLICATION
ControlSpace Designer software version 5.0 or later
GENERAL
LED Status Indicators Power LED, four (4) tri-color signal status for input channels
Digital Conversion 24 kHz / 24-bit
Certifications FCC Part 15 Class A; UL 60950-1, 2nd edition, 2014-10-14, CAN/CSA C22.2 No. 60950-1-07, 2nd edition, 2014-10,
IEC 60950-1:2005 (2nd edition)
Operating Temperature 0 °C - 40 °C (32 °F - 104 °F)
