Audio Technica AT846/O Omnidirectional Condenser Boundary Microphone
Original price was: ₹13,000.00.₹10,999.00Current price is: ₹10,999.00.
The AT846/O is a wide-range condenser microphone with an omnidirectional polar pattern. It is designed for unobtrusive table, ceiling or panel-mounted applications for high-quality sound reinforcement, teleconferencing, professional recording, television and other demanding sound pickup applications.
The AT846/O is equipped with UniGuard® RFI-shielding technology, which offers outstanding rejection of radio frequency interference (RFI). The microphone is RoHS compliant – free from all substances specified in the EU directive on hazardous substances.
The microphone should be placed on a flat, unobstructed mounting surface. The small diameter capsule near the boundary eliminates phase distortion and delivers clear, high-output performance.
Description
The microphone requires 11V to 52V phantom power for operation. The microphone is enclosed in a heavy-duty die-cast case and protected by a two-layer steel mesh grille. The low-profile housing has a low-reflectance black finish. Isolators are included with the microphone for optional mechanical isolation from the mounting surface.
To mount the AT846/O in a ceiling or table top without the isolators, a 20.5 mm diameter hole is required. To mount the AT846/O with the isolators, a 23.5 mm hole is required. Place the isolators on either side of the hole to achieve mechanical isolation from the mounting surface.
AT846/O Specifications
Element
|
Fixed-charge back plate, permanently polarized condenser
|
Polar Pattern
|
Omnidirectional
|
Frequency Response
|
54 ~ 20,000 Hz
|
Open Circuit Sensitivity
|
-33 dB (22.4 mV) re 1V at 1 Pa
|
Impedance
|
100 Ω
|
Maximum Input Sound Level
|
131 dB SPL, 1 kHz at 1% T.H.D.
|
Signal-To-Noise Ratio
|
>69 dB, 1 kHz at 1 Pa
|
Phantom Power
|
11~52V DC, 2 mA typical
|
Weight
|
48 g
|
Dimensions
|
64.6mm x 30.0 mm (Long X Diameter)
|
Output Connector
|
Integral 3-pin XLRM-type
|
Accessories Furnished
|
One pair isolators
|